|
"Don't Injure Yourself" is the message
as thousands of people regularly embark on home improvement projects
every weekend.
Each year a quarter of a million people become
seriously injured as a result of DIY mishaps and 100,000 of these
injuries are serious enough to lead to a visit to the casualty
department (1).
We see many patients with associated aches and
pains that come with working on the house. These can range from
back pain, neck pain and repetitive stain injury (RSI). It’s
easy to forget that many DIY activities are strenuous and may
involve lifting, twisting, bending and holding unusual postures,
while using different muscles from those used in more usual everyday
activities.
The Chartered Society of Physiotherapy, the professional
body of physiotherapy, has produced the ‘top tips’
guide to injury free DIY which is reproduced below. The guide
focuses on a number of areas to enhance personal safety, including
good posture, tips for using equipment and tools, and the importance
of taking breaks.
Planning your DIY activities is essential, as
is leaving enough time to complete them. Warming up before commencing
work, pacing oneself and working in manageable chunks is crucial
in ensuring that adequate care for personal safety is taken.
Many of us are guilty of overestimating our abilities
and underestimating the amount of work that needs to be done.
The most important thing to remember is that even the simplest
tasks can be hazardous and may require more effort and care than
expected.
General DIY Tips
If DIY isn't carried out properly,
it could lead to muscle strain, sprain, back spasms and other
injuries. Take extra care when lifting heavy weights.
The golden rule to tackling DIY is PREPARATION.
Plan ahead
- prevention is better than cure - general fitness is key
to tackling tough jobs around the house
- know your limits - if you haven't done heavy tasks for a
while then there is a good chance you may injure yourself
if you don't take care
- if you have an injury or want advice on how to prepare for
DIY and home improvements, consult a chartered physiotherapist
- set out in detail what tasks need completion; big jobs may
lead to tiredness - so don't overdo it!
- keep children away when carrying out work
- call a professional where necessary
- eliminate hazards which could lead to tripping, slipping
and falls - such as loose carpets and wires
Leave enough time for jobs
- don't rush to finish; try and spread tasks over a few days
- pace yourself and work in manageable chunks
Wear comfortable clothing
- make sure you can move around easily
- keep knees covered if carrying out jobs that require kneeling
- wear sturdy shoes to protect and support feet
- wear sun block and a hat if working outdoors in the sun
Use comfortable tools
- use lightweight, long-handled tools - preferably with interchangeable
heads, which can reduce the need to bend over
- check you can cope with the length and weight of power tools
- use lightweight wheelbarrows; avoid bending and overloading
to prevent straining your back when moving loads around
- use a kneeling pad when kneeling on hard surfaces to avoid
sore knees
- use extension poles for rollers to reach further without
straining and compromising safety
Finishing
- pack away all tools as those left out could cause serious
injuries
- store away tools and equipment so that they are easily retrieved
DIY Best Practice
Warm up
- carry out simple stretches to prepare muscles for DIY work
Packing
- when working with boxes and cases, these should be on a
high surface or table not on the floor
- bend knees, keep the back straight and keep the item close
to you when lifting or putting on the floor
- don't lift above the waist or shoulder as this could lead
to overstraining
- carry manageable and balanced loads
- pack heavy items in a small box and mark ‘heavy’
Moving furniture
- avoid moving heavy furniture on your own - get a friend
to help
- bend knees and push items rather than pull
- use a non-friction surface under the item to assist in movement
Add variety and breaks
Where possible, add variety to DIY. Get up and
walk around between tasks (every 10-20 minutes). This helps restore
blood flow and prevents cramping. Also:
- switch jobs every 10-20 minutes so that you can use different
muscles
- be ambidextrous - change sides so that both can be exercised
in equal amounts
- rest intermittently as repeated movements could lead to
repetitive strain injury if carried out for a long time
Relax
Carry out cool down exercises after DIY tasks.
- upon completion of DIY, muscles are still likely to be warm
and flexible - stretching is an excellent way to avoid stiffness
- go for a walk or swim to help ward off muscle soreness
DIY Posture
When carrying out DIY, there are four main positions
that need careful consideration in terms of deciding which posture
is best to adopt - low lying, kneeling, standing and reaching.
Chartered physiotherapists recommend adopting a comfortable posture
in whatever task is being carried out so that unnecessary muscle
strain to any particular area of the body can be avoided.
Here are some facts about the main DIY positions we may adopt.
Low lying
Lying on the ground on either side, on your back
or front to tackle tasks at floor level, such as fixing leaky
pipes, unblocking sinks, working with fuses and wiring, working
in low level roofs, etc.
- Plan your DIY work and anticipate how long you are going
to be in a specific position. You may need to take short breaks
during the task to help reduce the likelihood of injury.
Kneeling
Kneeling on the floor on soft or hard surfaces
for tasks at waist level.
- Avoid bending too far forward as this could strain the back
- Get up regularly to avoid cramping and to restore circulation
Standing
Standing up for tasks at chest or head level.
- Avoid twisting and bending
Reaching
Standing up for tasks that are high up which
may require stretching out arm(s) in order to reach.
- Use a ladder to help access hard to reach places. Keep upright
on ladders and make sure it is secure when being used.
- If possible, use extension poles to reach further without
straining and compromising safety
Treating DIY Injuries
If you aware of the onset of a strain or sprain,
the first line of treatment in general, for the first 24-36 hours
is to apply the RICE principle:
- Rest
- Ice the area ideally for ten minutes every
half hour - wrap a bag of frozen peas in a damp cloth to minimise
the possibility of an ice burn
- Compression - ensure the injured area is
compressed but not too tight
- Elevation - keep the injured part elevated
If you do injure yourself carrying out
a DIY activity, it's best to seek advice from a chartered physiotherapist
or your GP.
Tips reproduced with permission from The
Chartered Society of Physiotherapy
Other Articles
|